Zinc powder

Do you require larger quantities?

We would be pleased to provide you with a customized quote for the packaging size you require.
Special packaging available upon request.

We offer first-class, tested zinc powder from European production
The purity is 99.9% (proven by analysis)

The distribution of particle sizes is as follows:

Size             Unit            min          max             Result

>150μm        %                0               0                  0

>63μm          %             0.0            15.0            12.8

>45μm          %           10.0            35.0            33.9

Stabilised
CAS number: 7440-66-6
density: 2,99 g/cm3
chemical analysis:
content (metal related) ≥99%
Lead (Pb) ≤0,003 % %
Iron (Fe) ≤0,002 %
Cadmium (Cd) ≤0,003 %

The powder is suitable for grinding, polishing, etc. because in its basic form it does not have any shiny effects and these are only
come to light after working with sandpaper, abrasive paste etc.
You can mix this powder into any type of binder or filler
Please mix this powder very slowly but thoroughly
It is recommended to apply on an already colored surface so that the effects can be shown to their best advantage
You can also mix several powders together as long as they do not have a flaky structure


Safety Instructions:

harmful to the environment

Harmful to the environment

CAS No: 7440-66-6

UN number: 3077
Danger warnings
H410 Very toxic to aquatic organisms with long-term effects
Safety Instructions
P273 Avoid release into the environment

Handling and storage
Avoid dust formation. Ensure adequate ventilation.
Keep container tightly closed. Store in a dry place.
Recommended storage temperature: 15 - 25 °C.

Individual protective measures (personal protective equipment)
Use safety goggles with side protection
Wear suitable protective gloves, NBR (nitrile rubber)
Respiratory protection is required for: dust formation. Particle filter device (EN 143). P1 (filters at least
80 % of air particles, identification colour: white)

melting point/freezing point 420 °C
Initial boiling point and boiling range 907 °C
Flammability (solid, gaseous) Flammable, stabilized
Bulk density 1.800 - 2.700 kg/m³
Explosive properties Not to be classified as explosive

Violent reaction with:
alkali hydroxide (caustic alkali), acids, alkalis (bases), ammonium compounds,
Azides, chlorates, nitrate, peroxides, metal catalyst, cadmium, hydrazine, nitric acid, halogenated
hydrocarbons, nitro compound, sulphur, oxidizing agent, => explosion hazard

Waste treatment methods
This product and its container must be disposed of as hazardous waste. Contents/container in accordance
with the local/regional/national/international regulations for disposal.

Assigned EAN numbers:
Zinc powder 100g    4251257501611
Zinc powder 250g    4251257501161
Zinc powder 1kg     4251257501178