brass powder 0-45µm 1kg
-16%
We offer first class, tested brass powder from German manufacture
The composition: 71.1% copper / 0.23% aluminum / remainder = zinc (confirmed by analysis)
Sieve analysis:> 45μm 0.1% / <45μm 99.9%
Particle shape: irregular
Manufacturing process: evaporated
Fill density: 3.72 g / cm3
The powder is suitable for grinding, polishing, etc. as it does not have any luster effects in its basic form,
After working with abrasive paper, sanding paste, etc., come to light
You can mix this powder into any kind of binder or putty
Please mix this powder very slowly but thoroughly
Recommendation is applied to an already colored background so that the effects are more effective
You can also mix several powders as long as they have no flaky structure
Safety note:
Signal word: ATTENTION
Hazard statements:
H400 Very toxic to aquatic life with long lasting effects.
Safety instructions:
P273 Avoid release to the environment.
P391 Collect spills.
P501 Dispose of contents / container in accordance with local / regional / national / international regulations
Other dangers:
Inhalation of dust leads to irritation of the airways, inhalation of higher concentrations can cause fever
CAS: 7440-50-8 copper powder
CAS: 7440-66-6 zinc powder
CAS: 7429-90-5 Aluminum
Precautions for safe handling
Avoid dust formation
Dust formation, which can not be avoided, must be taken regularly
Store in a well-closed container in a cool, dry place
Ensure good ventilation / exhaustion at workplace
Requirements to be met by storerooms and containers: Store in a well-closed container in a cool, dry place
Respiratory protection: Respiratory protection recommended Filter P2
Eye protection: Safety glasses
Body protection: Protective clothing
Risk of explosion: The product is not explosive
Self-igniting: Product is not self-inflammable
UN3077
Melting point: 800 - 1080 ° C
Density at 20 ° C: 8.0 - 8.9 g / cm3
The composition: 71.1% copper / 0.23% aluminum / remainder = zinc (confirmed by analysis)
Sieve analysis:> 45μm 0.1% / <45μm 99.9%
Particle shape: irregular
Manufacturing process: evaporated
Fill density: 3.72 g / cm3
The powder is suitable for grinding, polishing, etc. as it does not have any luster effects in its basic form,
After working with abrasive paper, sanding paste, etc., come to light
You can mix this powder into any kind of binder or putty
Please mix this powder very slowly but thoroughly
Recommendation is applied to an already colored background so that the effects are more effective
You can also mix several powders as long as they have no flaky structure
Safety note:
Signal word: ATTENTION
Hazard statements:
H400 Very toxic to aquatic life with long lasting effects.
Safety instructions:
P273 Avoid release to the environment.
P391 Collect spills.
P501 Dispose of contents / container in accordance with local / regional / national / international regulations
Other dangers:
Inhalation of dust leads to irritation of the airways, inhalation of higher concentrations can cause fever
CAS: 7440-50-8 copper powder
CAS: 7440-66-6 zinc powder
CAS: 7429-90-5 Aluminum
Precautions for safe handling
Avoid dust formation
Dust formation, which can not be avoided, must be taken regularly
Store in a well-closed container in a cool, dry place
Ensure good ventilation / exhaustion at workplace
Requirements to be met by storerooms and containers: Store in a well-closed container in a cool, dry place
Respiratory protection: Respiratory protection recommended Filter P2
Eye protection: Safety glasses
Body protection: Protective clothing
Risk of explosion: The product is not explosive
Self-igniting: Product is not self-inflammable
UN3077
Melting point: 800 - 1080 ° C
Density at 20 ° C: 8.0 - 8.9 g / cm3