Copper powder - Flaky

Do you require larger quantities?

We would be pleased to provide you with a customized quote for the packaging size you require.
Special packaging available upon request.

We offer here very high quality, tested copper powder Flaky from German production.
The purity is 99,9% (proven by analysis)
The bulk density is 0,90g / cm3
Sieve size distribution:
               min./ max         Ist Wert
D10        12,0 - 18,0          14,0 μm
D50        36,0 - 42,0          36,7 μm
D90        65,0 - 75,0          66,7 μm
Particle shape: flaky and oxidation resistant
Manufacturing process: electrolytic

The powder is particularly suitable as a colour pigment which you can add to water-based binders.
You can add this copper powder to any kind of binder (emulsion paint, clear lacquer primer, filler).
Please make sure you have a colour-coordinated base, e.g. white if you want to have a good covering power because this will also save you metal powder.
You can also try a black base, which will increase the gloss effect and make the whole look very classy.
If you use an acrylic binder as a binder, the surface can even be washed off.
We recommend a mixing ratio of 1:10 for testing purposes.

This material is not suitable for grinding, polishing, etc.! For grinding, please use our other copper powders.

Safety instructions:

 Dangerous for the environment

Signal word: Caution

Hazard statements:

H228 Flammable solid

H302 Harmful if swallowed

H400 Very toxic to aquatic organisms

H411 Toxic to aquatic organisms, long lasting effects

Precautionary statements : Prevention:

P270 Do not eat, drink or smoke when using.

P273 Avoid release into the environment

P210 Keep away from heat/sparks/open flames/hot surfaces. Do not smoke

P240 Ground container and equipment to be filled

P241 Use explosion-proof electrical/ventilation/lighting equipment

P261 Avoid inhalation of dust

Reaction:

P391 Absorb spillage

P312 If you feel unwell, call a POISON CENTRE/doctor.

P370 + P378 In case of fire: Use to extinguish: Special powder for metal fires

P370 + P378 In case of fire: Use to extinguish: Dry sand

Disposal:

P501 Dispose of contents/container to an approved waste disposal facility.

CAS No. 7440-50-8

After inhalation : If unconscious, keep on the side and seek medical advice. If symptoms persist, seek medical advice.

After skin contact : If on skin, rinse well with water. If on clothing, remove clothing. Wash immediately with soap and plenty of water.

After eye contact : Rinse eyes with water as a precaution. Remove contact lenses. Keep eye wide open when rinsing. Consult a medical specialist if eye irritation persists.

After ingestion : Keep airways clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Consult a doctor if symptoms persist.

Extinguishing media

Suitable extinguishing media : Special powder against metal fire Dry sand ABC powder

Unsuitable extinguishing media : Water Full water jet


Requirements for storage rooms and containers :

No smoking. Keep containers tightly closed in a dry, well-ventilated place. Electrical equipment/appliances must comply with the state of the art in safety technology. Electrical equipment/appliances must comply with the state of the art in safety technology. Keep away from sources of ignition - Do not smoke. Do not store near flammable substances. Keep containers tightly closed in a cool, well-ventilated place. To maintain product quality, store away from heat and direct sunlight.

Further information about storage conditions : Protect from humidity and water.

Keep away from oxidising agents, strongly acidic or alkaline substances to avoid exothermic reactions. Do not store together with oxidising and spontaneously combustible substances.

Storage class (TRGS 510) : 4.1B, Flammable solid hazardous substances.

Other information : Store in a dry place. No decomposition if stored and used as directed.

Humidity : Store in a cool, dry, well-ventilated place.

Translated with www.DeepL.com/Translator (free version)