- You do not have any products in your shopping cart yet.
.jpg "Copper powder - 38 µm - 63 µm - 315 µm")
.jpg "Preview: Copper powder - 38 µm - 63 µm - 315 µm")
Copper powder - 38 µm - 63 µm - 315 µm
(Product No.: p23)
.jpg "Copper powder - 38 µm - 63 µm - 315 µm")
We offer high-quality copper powder from German production.
Please refer to the separate product descriptions for product-specific data.
This powder is suitable for sanding, polishing, etc., as it has no glossy effect in its basic form. This effect only becomes apparent after processing with sandpaper, polishing compound, etc. You can mix this powder into any type of binder or filler. Please mix this powder very slowly but thoroughly.
It is recommended to apply it to an already colored surface so that the effects are more noticeable. You can also mix several powders together, as long as they do not have a flaky texture!
Safety instructions:
Dangerous for the environment
Signal word: Warning
Hazard statements:
H228 Flammable solid
H302 Harmful if swallowed
H400 Very toxic to aquatic life
H411 Toxic to aquatic life with long lasting effects
Precautionary statements : Prevention:
P270 Do not eat, drink or smoke if used
P273 Avoid release to the environment
P210 Keep away from heat/sparks/open flames/hot surfaces. Do not smoke
P240 Ground container and system to be filled
P241 Use explosion-proof electrical/ventilation/lighting equipment
P261 Avoid breathing dust
Response:
P391 Take up spillage
P312 If you feel unwell, call a POISON CENTER/doctor
P370 + P378 In case of fire: Use to extinguish: Special powder for metal fires
P370 + P378 In case of fire: Use to extinguish: Dry sand
Disposal:
P501 Dispose of contents/container to an approved waste disposal plant
CAS No. 7440-50-8
After inhalation : If unconscious, place in recovery position and seek medical advice. If symptoms persist, seek medical advice
After skin contact : If on skin, rinse thoroughly with water. If on clothing, remove clothing. Wash off immediately with soap and plenty of water
After eye contact : Flush eyes with water as a precaution. Remove contact lenses. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist
After ingestion : Keep airways clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, consult a doctor
Extinguishing media
Suitable extinguishing media : Special powder against metal fire Dry sand ABC powder
Unsuitable extinguishing media : Water Water jet
Requirements for storage rooms and containers :No smoking. Keep container tightly closed in a dry, well ventilated place. Electrical installations/equipment must comply with the latest safety standards. Electrical installations/equipment must comply with the state of the art in safety technology.Keep away from sources of ignition - No smoking. Do not store near flammable substances. Keep containers tightly closed in a cool, well-ventilated place. To maintain product quality, store away from heat and direct sunlightFurther information on storage conditions : Protect from humidity and waterAdvice on common storage : Keep away from oxidizing agents, strongly acidic or alkaline substances to avoid exothermic reactions. Do not store together with oxidizing and self-igniting substancesStorage class (TRGS 510) : 4.1B, Flammable solid hazardous substances
Other information : Store in a dry place. No decomposition if stored and used as directed
Humidity : Store in a cool, dry, well ventilated place
Suitable extinguishing media : Special powder against metal fire Dry sand ABC powder
Unsuitable extinguishing media : Water Water jet
Requirements for storage rooms and containers :
No smoking. Keep container tightly closed in a dry, well ventilated place. Electrical installations/equipment must comply with the latest safety standards. Electrical installations/equipment must comply with the state of the art in safety technology. Keep away from sources of ignition - No smoking.Do not store near flammable substances.Keep containers tightly closed in a cool, well-ventilated place.To maintain product quality, store away from heat and direct sunlight
Further information on storage conditions : Protect from humidity and water
Advice on common storage : Keep away from oxidizing agents, strongly acidic or alkaline substances to avoid exothermic reactions.Do not store together with oxidizing and self-igniting substances
Storage class (TRGS 510) : 4.1B, Flammable solid hazardous substancesOther information : Store in a dry place. No decomposition if stored and used as directed
Humidity : Store in a cool, dry, well ventilated place
Please refer to the separate product descriptions for product-specific data.
This powder is suitable for sanding, polishing, etc., as it has no glossy effect in its basic form. This effect only becomes apparent after processing with sandpaper, polishing compound, etc. You can mix this powder into any type of binder or filler. Please mix this powder very slowly but thoroughly.
It is recommended to apply it to an already colored surface so that the effects are more noticeable. You can also mix several powders together, as long as they do not have a flaky texture!
Safety instructions:
Dangerous for the environment
Signal word: Warning
Hazard statements:
H228 Flammable solid
H302 Harmful if swallowed
H400 Very toxic to aquatic life
H411 Toxic to aquatic life with long lasting effects
Precautionary statements : Prevention:
P270 Do not eat, drink or smoke if used
P273 Avoid release to the environment
P210 Keep away from heat/sparks/open flames/hot surfaces. Do not smoke
P240 Ground container and system to be filled
P241 Use explosion-proof electrical/ventilation/lighting equipment
P261 Avoid breathing dust
Response:
P391 Take up spillage
P312 If you feel unwell, call a POISON CENTER/doctor
P370 + P378 In case of fire: Use to extinguish: Special powder for metal fires
P370 + P378 In case of fire: Use to extinguish: Dry sand
Disposal:
P501 Dispose of contents/container to an approved waste disposal plant
CAS No. 7440-50-8
After inhalation : If unconscious, place in recovery position and seek medical advice. If symptoms persist, seek medical advice
After skin contact : If on skin, rinse thoroughly with water. If on clothing, remove clothing. Wash off immediately with soap and plenty of water
After eye contact : Flush eyes with water as a precaution. Remove contact lenses. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist
After ingestion : Keep airways clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, consult a doctor
Extinguishing media
Suitable extinguishing media : Special powder against metal fire Dry sand ABC powder
Unsuitable extinguishing media : Water Water jet
Requirements for storage rooms and containers :No smoking. Keep container tightly closed in a dry, well ventilated place. Electrical installations/equipment must comply with the latest safety standards. Electrical installations/equipment must comply with the state of the art in safety technology.Keep away from sources of ignition - No smoking. Do not store near flammable substances. Keep containers tightly closed in a cool, well-ventilated place. To maintain product quality, store away from heat and direct sunlightFurther information on storage conditions : Protect from humidity and waterAdvice on common storage : Keep away from oxidizing agents, strongly acidic or alkaline substances to avoid exothermic reactions. Do not store together with oxidizing and self-igniting substancesStorage class (TRGS 510) : 4.1B, Flammable solid hazardous substances
Other information : Store in a dry place. No decomposition if stored and used as directed
Humidity : Store in a cool, dry, well ventilated place
Suitable extinguishing media : Special powder against metal fire Dry sand ABC powder
Unsuitable extinguishing media : Water Water jet
Requirements for storage rooms and containers :
No smoking. Keep container tightly closed in a dry, well ventilated place. Electrical installations/equipment must comply with the latest safety standards. Electrical installations/equipment must comply with the state of the art in safety technology. Keep away from sources of ignition - No smoking.Do not store near flammable substances.Keep containers tightly closed in a cool, well-ventilated place.To maintain product quality, store away from heat and direct sunlight
Further information on storage conditions : Protect from humidity and water
Advice on common storage : Keep away from oxidizing agents, strongly acidic or alkaline substances to avoid exothermic reactions.Do not store together with oxidizing and self-igniting substances
Storage class (TRGS 510) : 4.1B, Flammable solid hazardous substancesOther information : Store in a dry place. No decomposition if stored and used as directed
Humidity : Store in a cool, dry, well ventilated place
Copper powder 38 µm
| Features | Unit | Actual value | Lower limit | Upper limit | Target value |
| Sieve analysis ISO 4497 Class backlogs | - | - | - | - | - |
| |> 38 µm | % | 4,3 | - | 5,0 |
|
| < 38 µm | % | 95,7 | 95,00 | - |
|
| Filling density ISO 3923/1 | g/cm3 | 1,12 | 1,00 | 1,20 |
|
| spec. surface (Fisher) | cm2/g | 1900 |
|
| 1800 |
| Oxygen ISO 4491/4 | % | 0,11 | - | 0,20 |
|
| Manufactured a. Cu-CATH-2 min. 99.9% EN 1978 | |||||
Copper powder 63 µm
| Features | Unit | Actual value | Lower limit | Upper limit | Target value |
| Sieve analysis ISO 4497 Class backlogs | - | - | - | - | - |
| |> 63 µm | % | 1,5 | - | 3,0 |
|
| |> 45 µm | % | 4,1 | - | 10,0 |
|
| < 45 µm | % | 94,4 | 87,0 | - |
|
| Filling density ISO 3923/1 | g/cm3 | 1,26 | 1,20 | 1,40 |
|
| spec. surface (Fisher) | cm² | 1600 |
|
| 1600 |
| Oxygen ISO 4491/4 | % | 0,09 | - | 0,20 |
|
| Manufactured a. Cu-CATH-2 min. 99.9% EN 1978v | |||||
Copper powder 315 µm
| Features | Unit | Actual value | Lower limit | Upper limit | Target value |
| Sieve analysis ISO 4497 Class backlogs | - | - | - | - | - |
| |> 630 µm | % | 0,0 | - | 1,0 |
|
| > 315 µm | % | 31,2 | 10,0 | 40,0 |
|
| > 200 µm | % | 52,6 | 50,0 | 80,0 |
|
| > 80 µm | % | 14,2 | - | 20,0 |
|
| < 80 µm | % | 95,7 | 95,00 | - |
|
| Filling density ISO 3923/1 | g/cm3 | 2,83 | 2,70 | 3,20 |
|
| Flow duration ISO 4490 2,5mm | s | 40,0 | - | 40,0 |
|
| Oxygen ISO 4491/4 | % | 0,03 | - | 0,07 |
|
| Manufactured a. Cu-CATH-2 min. 99.9% EN 1978 | |||||
Customers who bought this product bought also the following products:
This product was added to our catalog on Tuesday, April 21, 2020.