Bronzepowder - 75 - 250 µm

Bronzepowder in high quality
The purity is 85%
Sn content: 9.0 - 11%

The particle size is 75-250 μm
The particle shape is spotty
The manufacturing process is water distortion
 
The powder is suitable for grinding, polishing, etc. as it does not have any luster effects in its basic form,
After working with abrasive paper, sanding paste, etc., come to light
You can mix this powder into any kind of binder or putty
Please mix this powder very slowly but thoroughly
Recommendation is applied to an already colored background so that the effects are more effective
You can also mix several powders as long as they have no flaky structure
 
 
 
Signal word Caution

Statements
H400 Very toxic to aquatic organisms.
H411 ​​Toxic to aquatic organisms, long-term effects

safety instructions
P273 Avoid release to the environment.
P391 Collect spills.
P501 Dispose of contents / container in accordance with local / regional / national / international regulations.

2.3 Other hazards
Inhalation of dust or fumes leads to respiratory irritation.
Inhalation of higher concentrations can cause fever

Precautions for safe handling
Avoid dust formation.
Dust formation, which can not be avoided, must be taken regularly.
Store in a well-closed container in a cool, dry place.
Ensure good ventilation / exhaustion at workplace.
Information about fire and explosion protection:
Keep ignition sources away - do not smoke.
Protect from heat
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and containers: Store in a well-closed container in a cool, dry place.
Storage instructions:
Store away from combustible materials.
Do not store together with oxidizing or acidic substances.
Further information on storage conditions:
Protect from humidity and water.
Keep container in a well-ventilated place

Personal protective equipment:
General protective and hygienic measures:
The usual precautions for handling chemicals must be observed.
When using do not eat, drink, smoke, sniff.
Keep away from food, drink and animal feed.
Wash hands before breaks and at the workplace.
Respiratory protection:
Respiratory protection recommended.
Filter P2
Hand protection:
Preventive skin protection by using skin protection is recommended.
Gloves made of leather
After use of gloves, use skin cleansing and skin care products.
Selection of the glove material taking into account breakthrough times, permeation rates and degradation.
Glove material
The selection of a suitable glove is not only from the material, but also from other quality features
Dependent and vary from manufacturer to manufacturer. Because the product is a preparation of several substances
, The durability of glove material is not predictable and must therefore be prior to use
Be checked.
Penetration time of the glove material
The exact breakthrough time must be observed and adhered to by the protective glove manufacturer.
Eye protection:
Not mandatory.
safety goggles
Body protection: Protective clothing

Boiling point / boiling range:> 999 ° C
Flammability (solid, gaseous): The substance is not flammable
Self-igniting: Product is not self-inflammable
Risk of explosion: The product is not explosive

14.1 UN number
ADR, IMDG, IATA UN3077
14.2 UN proper shipping name
ADR 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.A.G. (Copper powder,
Zinc powder - zinc dust (stabilized))